Densely Assembled Aluminum Veneer
2. Advanced equipment is adopted, with accurate forming size, clear edges and corners and clear linesThe advanced equipment is used, the molded size is accurate, the edges and corners are sharp, and the lines are clear
3. Various shapes and patterns of densely assembled aluminum veneers can be produced according to drawings and samples
Performance introduction
The densely assembled aluminum veneer is named according to the
installation method, the two aluminum veneers are spliced with each other
during the installation process and there is almost no gap in the middle. The
densely assembled aluminum veneer can be molded by means of the technologies
such as computerized drawing expansion and CNC bending according to the
drawings or samples provided by the user and it has many advantages such as
exquisite and beautiful shape, corrosion resistance, elegant color. After
molded, the paint can be freely selected for the pre-treated surface
(fluorocarbon, powder, polyester paint spraying, etc.).
Performances
and characteristics:
1. It is provided with light weight, good rigidity, strong weather resistance and corrosion resistance,good processing performance and cannot be easily faded.
2. Advanced equipment is adopted, with accurate forming size, clear edges and corners and clear linesThe advanced equipment is used, the molded size is accurate, the edges and corners are sharp, and the lines are clear
3. Various shapes and patterns of densely assembled aluminum veneers can be produced according to drawings and samples
Field of use: Opera house lobby ceiling, large building exterior wall, column cover
decoration, gymnasium, airport, station, subway station, etc.
Technological parameters
|
Liquid fluorocarbon spraying (two coatings) |
Average film thickness ≥30um, minimum local film thickness ≥25um |
|
Liquid fluorocarbon spraying (three coatings) |
Average film thickness ≥40um, minimum local film thickness ≥34um |
|
Liquid fluorocarbon spraying (four coatings) |
≥65um |
|
Powder (fluorocarbon) |
Minimum local film thickness ≥30um |
|
Powder (polyester) |
Minimum local film thickness ≥40um |
|
Resistant to artificial accelerated aging |
Color difference ≤3.0 |
|
Appearance quality |
There are no surface defects such as flow marks, cracks, bubbles, paint slags, etc. |
|
Size deviation side length (mm) |
Side length≤2,000, allowable deviation: -1.5-0; Side length＞2,000, allowable deviation: -2.0-0 |
|
Diagonal line of size deviation (mm) |
Length≤2,000, allowable deviation≤2.0; Length＞2,000, allowable deviation ≤2.5 |
|
Size deviation opposite side size (mm) |
Length≤2,000, allowable deviation≤1.5; Length＞2,000, allowable deviation ≤2.5 |
Only produces high-quality products
Advanced production equipment- assurance of high-quality aluminum panels
The company is located in the southeast of the intersection of Xiangjiang Road and Xiaguang Road, Dong'e County Economic Development Zone, Shandong Province, covering an area of 68,000 square meters and with a registered capital of RMB 30 million, fixed assets of more than RMB 90 million and a total design investment of RMB 180 million.
The company has two leading CNC aluminum composite panel production lines at home and abroad currently, two aluminum veneer production lines, one aluminum veneer intelligent production line, and one color-coated aluminum foil CNC production line, and its products include:aluminum veneer, aluminum composite panel, color-coated aluminum foil, profiles spraying, sheets spraying, etc., the annual output of various aluminum composite panels is more than 3 million square meters, the annual output of various aluminum veneers is 3 million square meters, and the annual output of sheet after roller coating is 3.6 million square meters. The annual sales revenue of the company can reach RMB 760 million.
