Fluorocarbon Aluminum Veneer
2.It is provided with the performances of acid resistance, alkali resistance, UV resistance, etc., and the service life is generally 15 years within which no fading may occur.
3.It is lightweight and has high strength and good rigidity.
4.It has good processability and strong plasticity, and it can be processed into various shapes.
5.It has strong stain resistance and can be easily cleaned and maintained.
6.The color is very rich and the decoration effect is good.
Performance introduction
The conventional fluorocarbon series aluminum veneer produced Haitian
Seven Colors is processed and molded with 1100 and 3003 series aluminum alloys
as the main materials by cutting, bending, punching, welding and other
processing technologies, and after the molded sample is pickled and passivated,
the finished product can be made after spaying of 70% PVDF resin on the surface
of the sample and baking. The fluorocarbon aluminum veneer curtain wall system
is provided smooth surface and good wind pressure resistance, and a variety of
colors can be selected, thus, the building can pass a distinctive modern sense.
The professional technical design can be adopted to meet a variety of
functional needs and such product can be widely used in wall decoration of
various commercial or industrial buildings.
Performances
and characteristics:
1.It is provided with good fire resistance and non-combustibility.
2.It is provided with the performances of acid resistance, alkali
resistance, UV resistance, etc., and the service life is generally 15 years
within which no fading may occur.
3.It is lightweight and has high strength and good rigidity.
4.It has good processability and strong plasticity, and it can be
processed into various shapes.
5.It has strong stain resistance and can be easily cleaned and maintained.
6.The color is very rich and the decoration effect is good.
Field of use: In addition to exterior wall decoration of building, it can also be
applied to outdoor signboard advertisements, high-end commercial buildings,
furniture, exhibition stands, subways, marine transportation tools, etc.
Technological parameters
Liquid fluorocarbon spraying (two coatings) |
Average film thickness ≥30um, minimum local film thickness ≥25um |
Liquid fluorocarbon spraying (three coatings) |
Average film thickness ≥40um, minimum local film thickness ≥34um |
Liquid fluorocarbon spraying (four coatings) |
≥65um |
Powder (fluorocarbon) |
Minimum local film thickness ≥30um |
Powder (polyester) |
Minimum local film thickness ≥40um |
Powder (fluorocarbon) |
Minimum local film thickness ≥40um |
Resistant to artificial accelerated aging |
Color difference ≤3.0 |
Appearance quality |
There are no surface defects such as flow marks, cracks, bubbles, paint slags, etc. |