Perforated Aluminum Veneer
2. It is provided with strong three-dimensional perception and vivid image and it can be processed into various geometric shapes such as arcs and curved surfaces.
3. It does not need to be cut on the construction site, but can only be fixed on the skeleton, the maintenance cost is low, the service life is long and it is environmentally friendly.
Performance introduction
The perforatedaluminum veneer
is made of high-quality 1100, 3003 and 5005 aluminum alloy veneers as the base
materials, and it is a kind of aluminum veneer after being punched, molded and
sprayed on a CNC punching machine. The main hole shapes include round holes,
square holes, prismatic holes, triangular holes, five-pointed star holes,
oblong holes, square holes, honeycomb holes, etc. A variety of complex hole
shapes can be also customized and processed and colors can be modulated
according to engineering drawings, the decoration needs of different buildings
can be met and the design concepts and architectural styles can be better
expressed.
Performances
and characteristics:
1. It is provided with light weight, good rigidity, strong weather
resistance and corrosion resistance,good processing performance,cannot be easily faded.
2. It is provided with strong three-dimensional perception and vivid image
and it can be processed into various geometric shapes such as arcs and curved
surfaces.
3. It does not need to be cut on the construction site, but can only be
fixed on the skeleton, the maintenance cost is low, the service life is long
and it is environmentally friendly.
Field of use: Decoration projects of interior and exterior aluminum veneers for
high-end commercial buildings, stadiums, theaters, schools, airports, stations,
subway stations, museums, etc.
Technological parameters
Liquid fluorocarbon spraying (two coatings) |
Average film thickness ≥30um, minimum local film thickness ≥25um |
Liquid fluorocarbon spraying (three coatings) |
Average film thickness ≥40um, minimum local film thickness ≥34um |
Liquid fluorocarbon spraying (four coatings) |
≥65um |
Powder (fluorocarbon) |
Minimum local film thickness ≥30um |
Powder (polyester) |
Minimum local film thickness ≥40um |
Powder (fluorocarbon) |
Minimum local film thickness ≥40um |
Resistant to artificial accelerated aging |
Color difference ≤3.0 |
Appearance quality |
There are no surface defects such as flow marks, cracks, bubbles, paint slags, etc. |